Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / rasiklal
for pumping so simpal yar.
| Is This Answer Correct ? | 2 Yes | 6 No |
Post New Answer View All Answers
Can we use shunt trip coil instead of trip coil with protection relay for protection?
In single phase capacitor motor, if the motor rotate reverse direction then how much power will be consumed by the motor and why?
How can we calculate the efficiency of a Running (On-Load) Motor ? What parameters are required and what is the method ?
What is trip and closing coil in cb? Why need of them
What are the factor to be consider for CT selection in 132kV substation?
If i am running of spindle at 2000rpm ,but How to spindle stop at the second I am resetting the machine in CNC machines
what happened when we supply a dc current in dc motor?? can it worked properly?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
how to calculate voltage drop and followed by cable calculation?is there avail in formula?
list the type of vfd? wich is sutable for heating kiln?
Is it advantages of having star-delta vfd than normal star vfd , if yes why?
What is the difference between single core 2 wire and single core 3 wire system? Which application we are using this? and for What purpose we are using this?
How many devices can be connected in one zone of FACP
What is the fault or needs to be done when frequency in ac drives is not changing?
Why 1/3 is used in symmetrical components?
