Interested to Buy Any Domain ? << Click Here >> for more details...
how to calculate the speed of conveyer in meter per minute
- 3 Answers
- 19768 Views
- I also Faced
- E-Mail Answers
Answer Posted / manjunath
V=3.142* d* N
d- Dia of pulley in 'm'.
n- rotation in RPM.
v- velocity in m/min
| Is This Answer Correct ? | 33 Yes | 3 No |
Post New Answer View All Answers
what will be the angular speed of a model of turbine whose dia is half of the real one and operating in 1/4 th of the head of the real turbine rotating in Nrpm.
How do you find ductile-brittle transition temperature of metals?
how current flow found at one and of generator ,at star neutral point each phase.
How can I see where pipes are behind the wall?
RRB exam qustions.
why oil lift in screw chiller during change of climate.
Greetings This question is about hydraulics and I request an expert to answer it. A simple hydraulic machine is made up of two heads, a larger one with a larger force inside a wider pipe and a smaller one with a smaller force inside a smaller pipe in width as in the second picture on this link: http://science.howstuffworks.com/hydraulic1.htm The question is this: what happens if the smaller head and the smaller force doesn’t exist but the smaller pipe is high enough to take all the liquid? For example the larger head is 1.00 sqr metre and can go down 1.00m under a weight of 100.00kg. The cross sectional area of the smaller pipe is 0.001 sqr metre. Now when the larger head goes down 1.00m, how high the liquid from the wider pipe can go into the smaller pipe of the cross sectional area of 0.001 sqr metre? Regards
how control valve works? process line pressure is 50kg/cm2g and instrument air pressure is about 4 kg/cm2g.
Why should a chain drive be used over a belt or rope driven drive? State pro`s and con`s?
What is the most economical spacing of buttress ?
what is the use of vacuum balancing valve in CEP
Locate nozzle in a turbocharger
How to calculate motor bearing life - cycle (life time) (SKF bearing)
Why an increase in area is required to produce an increase of velocity in case of supersonic flow ?
How to calculate CFM in Compressure or Blower? EX. I hv Blower with 5hp motor.then how to calculate the CFM?
