Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / md ahmeduddin farooqi
Galvanometer is the historical name given to a moving coil
electric current detector. When a current is passed through
a coil in a magnetic field, the coil experiences a torque
proportional to the current. If the coil's movement is
opposed by a coil spring, then the amount of deflection of a
needle attached to the coil may be proportional to the
current passing through the coil. Such "meter movements"
were at the heart of the moving coil meters such as
voltmeters and ammeters until they were largely replaced
with solid state meters.
The accuracy of moving coil meters is dependent upon having
a uniform and constant magnetic field
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
How many turns are there in primary winding? (In Transformer)
How much of the total hydro power potential has been exploited so far in india?
A 3-phase IM is supplied from 50 Hz system. It runs at speed of 1440 rpm and slip equal to 4 %. Calculate number of pole pairs. A 1 B 6 C 2 D 3
LET ME NOW MORE ABOUT icu and ics for circuit breaker. how we calculate the rating of circuit breaker and i c u and ics values
What is the use for cable entry in control room?
Is it possible to measure the voltage of a battery from a single terminal?
What is ignition module of a CAT Gas Genset G-3508 Engine, Alternator SR4B Series. HOw its checked for correct functioning.Is it repiarable or replacable?
why the value of k is more in shell typr transformers?
State kirchoff voltage law?
1)Explain why the cradle guard is used on railway crossing in overhead line construction?
if a 3phase 100kva distribution transformer , 400 v,50 hz, 4-wire system is loaded at 160 k.w mostly 1-phase Lighting & Airconditioning split a.c load what will be the net effect on the power system in terms of voltage, powerfactor, current , efficiency of xformer
Is a direct shorth ciruit on a branch MCCB in a Low Voltage Switchboard a correct means of tesing the performance for discrimination?
thyristor controlled APFC panel design parameter?
During regenerative breaking= A rotating magnetic field is reversed B slip is positive C torque is positive D slip is negative
