Answer Posted / md ahmeduddin farooqi
An oscillator is a electronic or mechanical device that is
used to generate signals. Electronic oscillator employs a
sensitive amplifier whose output is fed back to input in
phase.Thus the signal generates.
| Is This Answer Correct ? | 7 Yes | 0 No |
Post New Answer View All Answers
how to find the multiplication factor for digital energy meter and analog energy meter
for what voltage will reactive power be largest in 380 kv line : a) 375kv b)380kv c)385kv
Use of switch mode power converter in real-time basis?
What is an 86-P or an 86-A trip
In India the supply voltage is 230 volt A.C. During the negative half cycle phase becomes neutral and neutral become phase? or what will happen during negative half cycle? how the electrons flow during positive and negative half cycle?
Why Ac Systems Are Preferred Over Dc Systems?
How to configure the drives in PLC, through Profibus commnication. And to how to address it?
why +24 v and -48 v give to BTS? If -48v protect from surge then why we not use -24 v?
CALCULATE THE TOTAL VOLTAGE DROP AND SELECT THE CABLE SIZE IN MM-SQARE FOR A PANEL-262KW AT 110 METER FROM THE SOURCE SUPPLY , SUPPLY VOLTAGE 240/415
What is A check, B check, C Check & D check for a diesel Generat
What is the gross weight to copper ratio in slip ring induction motor of 4000 HP,6.6 kv, 372amp, 992 rpm GE motor.
Do you need any help with FEWA Electrical Supervisor exams?
Why HT 11 KV Slipring Motors are connected in star ?
What is a differential amplifier?
I have a CT meter with ratio 60/5. The meter reading of previous month was 3290.49 and that of current month was 3797.26. How many chargeable units as per normal meter should be my reading.
