Interested to Buy Any Domain ? << Click Here >> for more details...
if we are using ACB in a panel the how much clearance do we
need in panel room.
- 2 Answers
- 4849 Views
- I also Faced
- E-Mail Answers
Answer Posted / abdulsubur
3.5M* 3.5m
| Is This Answer Correct ? | 0 Yes | 2 No |
Post New Answer View All Answers
what is the difference between droop mode and ischnorous mode in thermal powerplant?
Which device is used for the source of emission of electrons in a crt?
Hello sir, pls send me hpcl technical test papers .i am. Appearing for the exam.
how to identify conection leads of an unknown electric motor
Difference between rating factor of cable and derating factor of cable?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
What is Plank's Law?
advantages & disadvantages of Lagging and leading power factor .
Write the current equation in series RLC circuits.
How do i perform grounding of star point of Genset (400V) for making connection with step up transformer of DELTA-DELTA (400V to 20KV) ? while Genset itself has its own neutral and grounding bus bar inside genset breaker box whereas we have another neutral and grounding busbar in synchronizing panel next to genset at maximum distance of 6meter, would someone pls advice if we can only perform neutral grounding in synchronizing panel or should we ground neutral on both places inside genset breaker box and synchronizing panel.
I am getting above 60 V as open delta voltage against single phase unit ICT at tertiary delta formed and ICT getting trippped on NDR. ICT tested and found in order. PTs provided on tertiary are tested and in order. what may be the reason?
Sir, I m 3rd year student 4m DCE and want to do internship in siemens or l&t or any other mnc related to electrical engineering. please tell me the procedure 4 same and oblige me
generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...
what is meant by loss of field in a DC motor? how a universal motor works?
why ht motors are star connected?
