Answer Posted / pratheesh

By adding the electrolite in the cell.
Means if it is a Lead Acid battery, Add Diluted Sulphuric
Acid(H2SO4) in the electrolyte.
If it is a Nickel Cadmium battery, Add Potassium Hydroxide
(KOH) in the electrolyte.

By adding distilled water, electrolyte becomes more thin
and its specific gravity will go less.

what r the checklist while installing a 380 kva DG set

3851

---

what is doubling factor in making current of a breaker?

2111

---

1.main parts of generator? what is used A-check,B-check,C- check? 2.what is FM200 system in data centers? 3.difference between pac,ahu?

2175

---

before transformer oil dielectric strenght tests are taken the oil should be allowed to settle to remove option 1 air bubbles 2 gasses 3 contamination 4 water

1701

---

if we give 60 hz single phase supply to the transformer used in europe , than what will happen

1987

---

Name of the relay of low lub oil presuure in DG sets

2099

---

difference between ac series and parallel circuit

2094

---

what is the value of combined earthing in general electrical circiut?

1952

---

Scott connection is used for A 3-phase to 2-phase conversion B to achieve higher effciency C to save copper D to reduce harmonics

2359

---

What is creepage distance..... what will be the value for different voltage level

2024

---

WHAT IS AIR GAP VALUE IN MM FOR A 11KV BUSHING OF 11KV/440V DISTRIBUTION TRANSFORMER. AND AIR GAP VALUE OF 25 KV BUSHING OF AT TRANSFORMER OF 25 KV TRACTION. WHAT IS THE CALCULATION FOR THE AIR GAP PERMITTED FOR BUSHINGS AT DIFFERENT VOLTAGES.

3521

---

what is submersible pump?what is different between motor and sub motor?

2121

---

What descriptive information does the NEC require to be marked on all conductors?

2052

---

what type questions asked in hp cl

1933

---

actually i can't understand what is 3dB ? and it's really not clear to me.please any one let it me be cleared.

2300

---