Interested to Buy Any Domain ? << Click Here >> for more details...
What would be the ratio of a Delta-Wye tranformer having
48000 volts phase to phase on the primary and 4160 volts
phase to phase on the secondary?
- 5 Answers
- 7727 Views
- I also Faced
- E-Mail Answers
Answer Posted / ipit
48000/(4160/sqrt(3)) = 48000/2401.77 = 19.98
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
The capacitive reactance of a capacitor of 1/(2(PI)) F at 10^3 H is
Why do we apply both Differential and REF (HV and LV) protection schemes on YNyn configuration of a transformer?
what is auto re-closer?
what is difference between line differential and transformer differential?
What is the need of generator relay panel
When we have earthing mesh or underground earthing network in industrial plants, weather we have NT-S or NT-C-S kind of earthing system, so eventually weather we must use 4 or 5 wire in 400 volt level (For example 3×150+70 mm2 or 5×150 mm2) in this connection I would like to know exactly the paragraph of IEC or IEEE number
Why using synchronising methed in DG's sets?
What will be the impact on motor performance if a LT motor is rewound with changed motor winding data as given below:- Original winding data: total 04 wires = 02 wires of 17 SWG + 02 wires of 16.5 SWG. Changed Winding data: total 03 wires of 15.5 SWG wire size Motor rating: 160KW, 740RPM, 415V, ID FAN application. Normal Running Current = 95% of FL Current.
In what cases (circumstances)we should apply P controller, PD controller, PI controller & PID controller ?
how the speed of the gets motor regulated. does it draw the same current on the all speed level.
How to calculate that clean water supply in one Day from 150 KLD STP?
How to Calculate Transformer Earthing Electrode Rod Size both Body and neutral Earthing ? Any Standard Formula? Please Suggted
On a 6 KVA UPS we have to provide a DC MCB for Battery bank of 16 nos (12 V 42 AH). What Shall be the current rating of DC MCB ?
what is the clear formula to calculate cable size for a load
how do i work out the Amps of a incommer if i am running 1 37 KW motor and a 0,75 KW motor and some solinoids
