What is meant by transformer, why it should be used, with
out that equipment what happens if we transformed the
supply?
- 12 Answers
- 22549 Views
- Bhel, I also Faced
- E-Mail Answers
Answer Posted / prasanna d nerkar
A transformer can accept energy at one voltage and deliver
it at another voltage. This permits electrical energy to be
generated at relatively low voltages and transmitted at
high voltages and low currents, thus reducing line losses
and voltage drop hence transformers are issential for power
transmition
| Is This Answer Correct ? | 5 Yes | 1 No |
Post New Answer View All Answers
why occ characteristics of generator is also called as magnatization characteristics ?
explain all the classes with example
we have 2.2kw,Y,3000rpm motor but 6leads found in TB what happen if we connect in delta?
A 7 storey building has a floor area of 35,000sq.ft on each storey. On the ground floor 11KV electrical sub-station is to be erected. A load of 3kw for every 400sq.ft (p.f is 0.8) is proposed for each floor. fire pump 7.5hp, water pump 5hp, lift 2 nos, each 10hp and 20shop load of each shop is 5kw. calculate a. load each floor b. total load of building c. L.T feeders for aech floor and from transformer to main. d. distribution diagram e. capacity of sub-station/capacitor bank f. line diagram
what is the reason the main breaker is trip during the motor is running? (some time the breaker is not trip)
how you configure motorvision relay (L&T make)from DCS
What is the tests required for a 132 kV, 400 kV , 765 kV for a Circuit Breaker and Power Transformer before commissioning ?
when will be the iocl interview results i faced interview on 8th september 2008 iam from electrical branch i faced interview for the post of electrical engineer??????????????????????//
why it is not advisable to run low rating (19KVA) DG sets in parallel for long durations even though they are provided with droop ckts (QDC)
What Normal(Tangent) towers and Tension(Cut-point) Towers?
What should be setting for alarm,tripping and cooling fan on for power transformer's oil temp. and winding temp. indicator?
What should be the Sandwitch type Al. bus bar capacity for 2 M.W.Gen. set, having continuous full load current- 3463 Amps,ambient temp.- 50 Deg. C., Required temp. raise-20 deg.C., it will run 24 hrs, 365 days on full load, required highly reliable.
Explain bypass capacitor?
What is a feedback in control system?
what is servo motor and how it works?
