A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.

2229

---

placement paper samples of mspl company

1999

---

Is there a standard depth of gravel fill in Substation Switchyard? Please give a design/drawing. Thank you.

5470

---

hiiiii sir ..tell me the written test pattern for symphony teleca.....pleaseee

2584

---

What is the height of DA, DAL, DB, DC & DDE tower?

2434

---

I want previous year question paper of ONGC for chemical engg.

2268

---

who is your role modal give in few sentances

2214

---

who is your favourate actor in tollywood tellme about him in few points

3101

---

As i want some model question paper in basic computer science and history please send me immediately sir

1949

---

write a program to set all flags in 8085?

2316

---

xfhnchncv?

1961

---

Electrical Engineering

2132

---

I am going to appear RRB Sr. Section Engineer Exam, Electrical. Can you send me previous year questions of RRB Electrical engineer. specially Section Engineer questions. my email id is likerahulworld@gmail.com

1877

---

Why do you want to work here

2430

---

If anybody has placement papers for igl , plz send to me as soon my exam is on 12 Jan. My mail I'd is navjot.singh800@gmail.com

2691

---