please point out the wrong steps in that l3 switch conf
Building configuration……
Current configuration : 1802 byte
!
Version 12.2
no service pad
Service timestamps debug uptime
no service-password encryptions
!
hostname xxxx
!
enble secret XXXXXXXXXXX(omitted)
enable password jitendera kumar sinha
!
No aaa new-model
System mtu routing 1500 bytes
ip subnet-zero
ip routing
ip name-server 202.x.x.x.
ip name –server 203.x.x.x
ip name-server 192.168.x.x
ip dhcp excluded-address 172.x.x.x 172.x.x.x
!
ip dhcp pool ss
network 172..x.x.x 255.255.255.0
domain-name xxx.com
default-router 172.x.x.x
dns-server 192.x.x.x 203..x.x.x 202.x.x.x
lease10
!
!
!
!
!
no file verify auto
spanning-tree maode pvst
spanning-tree extended system-id
!
vlan internel allocation policy ascending
!
interface fastethernet 0/1
no switch port
ip address 172.x.x.x 255.255.255.0
!
interface fastethernet 0/2
no switch port
ip address 192.x.x.x
!
interface fastethernet 0/3
switcport access vlan 5
switchport mode access
!
interface fastethernet 0/4
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/5
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/6
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/7
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/8
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/9
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/10
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/11
Switcport access vlan 5
Switchport mode access
!
interface fastethernet 0/12
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/13
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/14
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/15
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/16
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/17
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/18
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/19
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/20
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/21
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/22
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/23
Switcport access vlan 5
Switchport mode access
!
Interface fastethernet 0/24
Switcport access vlan 5
Switchport mode access
!
Interface vlan 1
No ip address
Shutdown
!
Interface vlan 5
Ip address 172.16.x.x 255.255.255.0
!
Ip default-gateway 172.16.32.1
!
Ip classless
Ip route 0.0.0.0 0.0.0.0 fastethernet 0/1 172.x.x.x
Ip route 0.0.0.0 0.0.0.0 fasrethernet 0/2 192.168.x.x 254
Ip http-server
!
!
Control-plane
!
!
Line console 0
Line vty 0 4
Password password
Login
Line vty 5 15
Password password
Login
!
end
chek out the wrong steps and post it. i ma not able to ping
firewall
No Answer is Posted For this Question
Be the First to Post Answer
The Cisco Discovery Protocol (CDP) periodically sends out a multicast packet (at layer 2). Which command will alter the default interval of 60 seconds? A.) cdp hold 111 B.) cdp wait 111 C.) cdp interval 111 D.) cdp 111 E.) cdp timer 111
Can we write any script for router to instruct that from where it will boots e.g. TFTP,FLASH...if yes what is it and how? 1 of my frnds says its possible...
what is the difference between hdlc and ppp protocol
Identify the command to reload the router? A.) Router(config)# reload B.) Router# reset C.) Router# reload D.) Router> reload
What is the role of the LLC sublayer?
Which command will display the encapsulation type on interface serial 0? A.) show interface s0 B.) show all C.) show int s0 encap D.) show encap s0 E.) show encap
what is eigrp and what is the benfit of eigrp over igrp what is route summryization if one the router route is not showing the what should be problem how to resolve these problem what is fessible suceer. is the load balncing is one of the property of eigrp what is the metihod of authantication what is the diffrnec betwee pap and chap what is stp command for enabling stp and rstp why switching loop occur what is the main factor of ocuring switch loop what is the mechnaism for stoping the roting loop what is best diffrence betwwen ospf v1 nad ospf v2 what is vtp what is the diffrence between vtp version 1 and veron 2 what is the ip address what is the diffrence betwwen ip address mac address what is dhcp and how it work what is 3 way hand shake what is the difrence betwwen network id and brodcast id what is the network id for 111.111.111.10/29 what is the command for enabling vlan on 3650 csco switch
Which of the following are Distance Vector protocols? A.) IGRP B.) RIP C.) OSFP D.) EIGRP
Guys Please send me or suggest me any link for all interview question and answer on CCNA asked in TECH MAHINDRA. I have only 4-5 days for preparation. my mail id is nikhil9823@gmail.com
How do you disable advanced editing? A.) terminal editing B.) terminal no editing C.) disable editing D.) no terminal editing
Which of the following is an example of the Datalink Layer? A.) LLC B.) TCP C.) SQL D.) IPX E.) Token Ring F.) MAC
switch kitne volt per work karta hai. what is frame realy. what is isdn and pri and bri.