Interested to Buy Any Domain ? << Click Here >> for more details...
You have OSPF traffic flooding your network
via one of your router interfaces. Write the access
list line that will deny all ospf traffic. Don't
worry about the other lines of the access list.
- 1 Answers
- 4371 Views
- I also Faced
- E-Mail Answers
What are the ranges for the private ips?
What are the protocols that are used by every layer of ip/tcp model?
Explain the difference between simple authentication and md5?
What is the most common layer 2 device? A. Hub B. Router C. Switch D. Repeater
On an ISDN BRI interface, the control channel is the 'D' channel. What is the rate of this channel? A.) 64 Kbps B.) 1.544 Mbps C.) 128 Kbps D.) 2.048 Mbps E.) 16 Kbps
Which of the following is a layer 2 device? A.) Switch B.) Router C.) Repeater D.) Hub
Which element is used to define the rate in bits per second that a Frame Relay switch agrees to transfer data? A. clock rate (CP) B. Committed Information Rate (CIR) C. Local Management Interface (LMI) D. data link connection identifier (DICI) E. Committed Rate Measurement Intercal (CRIMI)
When using TCP, after a session is open, the applications can adjust the amount of segments they receive before sending an acknowledgment. This behaviour is known as ______________. FCS Windowing MTU adjustment Flexible Send Path
What is the Between Normal Switch and Manageable Switch?
Explain how many types of router?
What is the default LMI type? A.) Cisco B.) ANSI C.) IETF D.) Q933a
Your Ethernet interface currently has the IP address of 1.1.1.1/24. You would like it to have a second IP address of 2.2.2.2/24. Which command will do that? A.) ip address 1.1.1.1 2.2.2.2 255.255.255.0 B.) ip address 2.2.2.2 255.255.255.0 secondary C.) ip address 2.2.2.2 255.255.255.0 D.) This cannot be done, you can only have 1 IP address per physical interface. E.) ip address 2.2.2.2 /24
CCNA 
