What will transport layer do when data coming from session
layer. They asked about intial operation(3 - way handshake)
- 1 Answers
- 3576 Views
- HCL, I also Faced
- E-Mail Answers
Answer / rahul
transport layer basically take the data from session layer and select that,its a tcp or udp means wether it is reliable connection or unreliable connection and it also maintains the destination port and the source port as well and give all that information to network layer
| Is This Answer Correct ? | 2 Yes | 0 No |
Mention what is the matric of eigrp protocol?
The following is partial output from a routing table ; '192.168.10.0 [100/1300] via 10.1.0.1, 00:00:23, Ethernet1' Which routing protocol is being used? (assuming defaults have not been changed) A.) OSPF B.) RIP C.) BGP D.) IGRP
Which of the following is an example of a Transport Layer protocol? Ethernet IP TCP RS-232
What is icmp protocol?
Which IP Address Class can have 64,000 subnets with 64,000 hosts per subnet? A. Class B B. Class A C. Class C D. Class D
What should be the first command to create an access-list that prevents all users on subnetwork 10.10.128.0, using subnet mask 255.255.192.0, from being able to telnet anywhere? A.) access-list 101 deny tcp 10.10.128.0 0.0.63.255 any eq telnet B.) access-list 101 deny tcp 10.10.128.0 255.255.0.0 any eq telnet C.) access-list 101 deny tcp 10.10.128.0 255.255.192.0 any eq telnet D.) access-list 101 deny tcp 10.10.128.0 0.0.192.255 any eq telnet E.) access-list 101 deny tcp 10.10.128.0 0.0.128.255 any eq telnet F.) access-list 101 deny tcp 10.10.128.0 0.0.127.255 any eq telnet
What parameter is used with statically assigned routers to tell packets which interface to use to reach a distant network? A.) Mask B.) Subnet C.) Default gateway D.) Interface
Why ESP Transport mode is not compatible with NAT????? Though New IP Header in Tunnel mode & Original IP Header in Transport mode are out of Authentication & Encryption.
Your network uses a Class C address of 210.10.10.0. You must now split up the network into separate shores to handle multiple buildings separated by routers. Which two steps must you take to determine the proper shored mask for your networks? (Choose two) A. determine the number of seperate networks required B. determine how many devices will require DHCP addressing C. determine the maximum number of hosts that will be on each shored D. determine the miniumum number of hosts that will be on each shored E. determine which router will be the IP default gateway for each shored
Hi Everyone, i am CCNA certified, i am searching jobs related to ccna. Although i don't have experience in networking field, i found very difficult to search job(posted my resume in all job portals). I am very much interested to work in networking field, please guide me, my mail id: nagesha12adig@gmail.com; Please let me know any company taking ccna freshers(Preferably Bangalore location). Thanks guys...
Identify 3 characteristics of switches? A.) Increase available bandwidth B.) Decrease broadcast traffic C.) Support full duplex in a multipoint topology D.) Make forwarding decision using MAC address E.) Create collision domains
Given the following descriptions of layers of the OSI model 1) This layer segments and reassembles data into a data stream 2) This layer manages device addressing tracks the location of devices on the network and determines the best way to move data 3) This layer provides the physical transmission of the data and handles error notification network topology and flow control. Choose the statement that lists the layers in the order described above A. physical data link network B. physical session data link C. data link network transport D. data link transport network E. transport network data link F. transport data link network
CCNA 
