A plain carbon steel contains 45 wt% of proeutectoid ferrite. Define what is its average carbon content in weight percent? I know that you need to use a tie line in the phase diagram, but my book does not really give a good example to go by
580How do 304 stainless steel and 316 stainless steel weld to each other? I am hoping my medical device prospect will be able to weld a component made in 316 ss via metal injection molding toa 304 ss tube.
534Define what is the minimum temperature for stress relieving of astm a 519 gr.4130 material and please tell us where we can find the location.
523
What are the materials used to manufacture Aeroplane Wings?
Define what is proeutectoid ferrite and cementite?
What is the use of core prints?
What are the properties and application of manganese steel?
How much gold concentration should be in the organic phase (dbc) before reduction by oxalic acid solution? Is it effective on purity of gold in reduction step? Define what is the ratio of dbc to oxalic acid solution in this step?
What metal cord transfers electricity, and how can I tell?
Explain any method through which molds can shine after casting?
In welding, arc is too long due to ?
How to calculate heat affected zone in weld?
Is there a possibility of inducing stress cracking in an insulated stainless road tanker vessel (20 tonne capacity) if the vessel is subject to rapid filling (10 tonne /hr) with liquid methane (-160 c) assuming the vessel is at ambient. If so, where could I obtain suggested cooling rates?
The requirement for ASTM A217 Gr. WC9 castings for valves components like Body and Bonnet were Normalising at 920+/- 20 Deg. C and Tempring 780+/- 20 Deg. C The specification calls furnace shall be calibtated within +/-14 deg. C The Heat Chart shows minimum temperature for normalising 900 to 920 Deg. C, but maximum temperature 960-990 Deg. C Tempering 780+/-20 Deg. C is within limits and accepted. Casting having integral test bars, heat trated along with castings passed in chemical znalysis and mechanical properties. Since normalising maximum temperature is not meeting specification, where castings can be salvaged or renormalised and retempered to meet specification. Whether it will have affect on remechanical properties testing
On what Purpose helical gears are used?
What is tack welding ?
What is chemical composition and mechanical properties of IS 2004,Gr-3 and IS 305 AB-2?
What are the uses of electroplating?