What is view db2?

615

What is a literal control?

575

What is accounting period?

625

What is a stack pointer register?

607

WHAT IS THE BANK RECONSILATION, WHAT THE FORMAT OF IT

1725

How recorded command can be edited in ide?

513

A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.

1679

What are the different layers of ado.net?

511

What are the steps of implementing data warehousing?

524

You want to implement the one-to-one relationship while designing tables. How would you do it?

523

DG cranking voltage?

261

What is a linq cardiac monitor?

93

The hybrid framework can be implemented for any application. Is it true?

577

What is Registry?

1645

What value do you optimize when using a support vector machine (SVM)?

66