What are the advantages of star-delta starter with
induction motor?
- 7 Answers
- 44301 Views
- Merchant Navy, Naval Academy, Samundra Institute of Maritime Studies, YMCA, I also Faced
- E-Mail Answers
Answer Posted / k.senthil kumar
1. The main advantage of using the star delta starter is
reduction of current during the starting of the
motor.Starting current is reduced to 3-4 times Of current
of Direcr online starting.
2. Hence the starting current is reduced , the voltage
drops during the starting of motor in systems are reduced.
| Is This Answer Correct ? | 132 Yes | 15 No |
Post New Answer View All Answers
What is nichols chart?
If we connect a motor and generator together (I mean that the generator gives the motor electricity and the motor gives the generator movement) regardless the losses. Will the generator still generate and the motor still move?
If only R Phase is connected in 2 pole elcb, n is not connected than it will work or not in ground fault.
1.main parts of generator? what is used A-check,B-check,C- check? 2.what is FM200 system in data centers? 3.difference between pac,ahu?
How we can determine short circuiting current any plant and for example a plant which power generation is 415 volts and plant load is 500 kw.
Explain what is electric traction? Explain few advantages of electric traction system?
What is the effect on power factor, shown by a trivector meter; incase of reverse phase sequence. If the power factor of a system is lag what meter will show in case of reverse phase sequence connected to the meter. and What in case of lead.
In diesel generator how AVR get voltage to excitation. And basic diagram DG EXCITATION CIRCUIT.
Why compensation is necessary in feedback control system?
What is the relationship between voltage,current & frequency?
STATE USE OF ARC RUNNERS & SPLITTERS ?
What is main cause of cable's terminal point burned in Lug on high temperature although lug and cable selection is ok as per stantard and also tightness is ok as per situation. so please take in deep and tell correct answer thanku.
im electrical engineer, could any one help me for FEWA exam questions please ?
How we select the vector group of 3phase power transformer?
what will happen if multimeter(selector switch at DC voltage) and terminal at current is connected to DC supply?
