In a Waste heat recovery boiler feed control valve is after the economiser where as in auxilary boiler feed control valve is given before the economiser.why?
2 6498DG lube oil and waste oil how to dispose outside and there is any authorised vendors will be there for this.
2 5849How a pH sensor & analyzer work at waste water treatment plant, whats the principle & science is beyond this,How pH sensor sence & convert signal & move toward analyzer & analyzer show reading in percent? also what is temperature compensate option in analyzer
1 8438I want measure the volumetric flow of gas in waste heat recovery Boiler?Tell me how and which type of instruments required. Plz mail me:naba02222@gmail.com Sam please post the answer .
1561cost of normal waste of material under contact costing is debit to : 1)contract a/c 2) trading a/c 3) matrial a/c 4) profit and loss a/c
2 4207i wasted one year for the job after completed my btech what can i say about 1year time in interview
1600"You r bourn intelligent ",your education is just a waste of time (you have to answer in support of the statement )?
ups,
1934How can I remove/decrease TDS from sewage waste water? At the moment it is 900gm/l. What is recommended TDS level to dispose sewage water in sea?
2 4978
6. NEED OF ONGOING MANAGEMENT CYCLE( Case Study ) Sidney Greenburg was appointed the position of the director of marketing for a small electronics component manufacturer. The company had its revenues growing at the rate of 20% each year and in 1982, they were at 30 million level The president felt that the growth of the company required serious planning efforts to determining strategies product emphasis and new product development. Mr. Greenburg realising the need to develop the marketing plan developed a suggested format to obtain inputs from his regional sales managers. The format to obtain divided into two parts (a) territory brief for established status of sales activities and (b) territory plan asked for identification of key goals, strategy & resources required to accomplish stated goals. Sales forecast by products was requested for 3 plan Yrs. Tom Rosenfield was the marketing manager for Europe He was previously in the engineering department & was assigned to Europe because of his technical& Foreign language capabilities. He replied to Mr.Greenburg as follows: “While I will complete the forms on the country brief& country plan promptly I have some conceptual problems with them time& time again we have been requested for projected figures I remember putting together a presentation for the Executive Vice-President (VP) & Treasurer last year. Great we educated those guys but what are the results of such formality? The projections have not yielded specific results, resources are used at a minimal level & we are not generating needed sales. So it is my contention that while goals projections& forecasts provide immeasurable guidance for a company with stable sales & developed product lines, for us a fledglings (young) industry, they distract from the job at hand. My plan has always been to hit the market- as hard I am able & I believe this should hold true for all other regional managers. We have large amounts of resources held up in ineffective’ marketing planning efforts such as these need to redirect these efforts to self rather than compile data. We need more people beating the pavement (action) rater than sitting on their desks developing plans& strategies (contemplation) Sell, sell, sell. Get the backing as big as possible. Planning is wasteful. Let us concentrate on aggressive sales & optimize sales volume at any cost. A. What has Mr.Greenburg not done to accomplish his planning tasks? B. Is Mr.Rosenfield right in making his comments in response to Mr. Greenburg’s request? C. Is Mr. Rosenfleld performing his management function. D. What would you do if you were Mr.Rosenfleld’s boss?
6. NEED OF ONGOING MANAGEMENT CYCLE( Case Study ) Sidney Greenburg was appointed the position of the director of marketing for a small electronics component manufacturer. The company had its revenues growing at the rate of 20% each year and in 1982, they were at 30 million level The president felt that the growth of the company required serious planning efforts to determining strategies product emphasis and new product development. Mr. Greenburg realising the need to develop the marketing plan developed a suggested format to obtain inputs from his regional sales managers. The format to obtain divided into two parts (a) territory brief for established status of sales activities and (b) territory plan asked for identification of key goals, strategy & resources required to accomplish stated goals. Sales forecast by products was requested for 3 plan Yrs. Tom Rosenfield was the marketing manager for Europe He was previously in the engineering department & was assigned to Europe because of his technical& Foreign language capabilities. He replied to Mr.Greenburg as follows: “While I will complete the forms on the country brief& country plan promptly I have some conceptual problems with them time& time again we have been requested for projected figures I remember putting together a presentation for the Executive Vice-President (VP) & Treasurer last year. Great we educated those guys but what are the results of such formality? The projections have not yielded specific results, resources are used at a minimal level & we are not generating needed sales. So it is my contention that while goals projections& forecasts provide immeasurable guidance for a company with stable sales & developed product lines, for us a fledglings (young) industry, they distract from the job at hand. My plan has always been to hit the market- as hard I am able & I believe this should hold true for all other regional managers. We have large amounts of resources held up in ineffective’ marketing planning efforts such as these need to redirect these efforts to self rather than compile data. We need more people beating the pavement (action) rater than sitting on their desks developing plans& strategies (contemplation) Sell, sell, sell. Get the backing as big as possible. Planning is wasteful. Let us concentrate on aggressive sales & optimize sales volume at any cost. A. What has Mr.Greenburg not done to accomplish his planning tasks? B. Is Mr.Rosenfield right in making his comments in response to Mr. Greenburg’s request? C. Is Mr. Rosenfleld performing his management function. D. What would you do if you were Mr.Rosenfleld’s boss?
is the carbon dust collected from the stask of diesel set is hazardous waste ?
is the used fire extinguisher fall under Hazardous waste material?
What are the active wastes in nuclear submarrine and how they disposed or dump?
6.NEED OF ONGOING MANAGEMENT CYCLE( Case Study ) Sidney Greenburg was appointed the position of the director of marketing for a small electronics component manufacturer. The company had its revenues growing at the rate of 20% each year and in 1982, they were at 30 million level The president felt that the growth of the company required serious planning efforts to determining strategies product emphasis and new product development. Mr. Greenburg realising the need to develop the marketing plan developed a suggested format to obtain inputs from his regional sales managers. The format to obtain divided into two parts (a) territory brief for established status of sales activities and (b) territory plan asked for identification of key goals, strategy & resources required to accomplish stated goals. Sales forecast by products was requested for 3 plan Yrs. Tom Rosenfield was the marketing manager for Europe He was previously in the engineering department & was assigned to Europe because of his technical& Foreign language capabilities. He replied to Mr.Greenburg as follows: “While I will complete the forms on the country brief& country plan promptly I have some conceptual problems with them time& time again we have been requested for projected figures I remember putting together a presentation for the Executive Vice-President (VP) & Treasurer last year. Great we educated those guys but what are the results of such formality? The projections have not yielded specific results, resources are used at a minimal level & we are not generating needed sales. So it is my contention that while goals projections& forecasts provide immeasurable guidance for a company with stable sales & developed product lines, for us a fledglings (young) industry, they distract from the job at hand. My plan has always been to hit the market- as hard I am able & I believe this should hold true for all other regional managers. We have large amounts of resources held up in ineffective’ marketing planning efforts such as these need to redirect these efforts to self rather than compile data. We need more people beating the pavement (action) rater than sitting on their desks developing plans& strategies (contemplation) Sell, sell, sell. Get the backing as big as possible. Planning is wasteful. Let us concentrate on aggressive sales & optimize sales volume at any cost. A. What has Mr.Greenburg not done to accomplish his planning tasks? B. Is Mr.Rosenfield right in making his comments in response to Mr. Greenburg’s request? C. Is Mr. Rosenfleld performing his management function. D. What would you do if you were Mr.Rosenfleld’s boss?
hi friends, i got selected in tcs, i m doing my b.e in one of the college in coimbatore.. i don have questions to post u.. but i have valid suggestion..its waste to prepare apti for tcs by looking at last 10 year question from internet.they changed all the apti question this year(2009).. but apti questions is easy..prepare critical reasoning for gre 12th edition..mug up the answers in critical reasoning.. u can download ebook for gre 12th edition..solve the critical reasoing question at the same time mug up it.. there were totally 3 critical reasoning question asked.. two for gre 12th edition so if u mug up u can finish two questions in 3 min.. so u will have 27 min for other question so u can work it out and find the ans..above i mentioned as 3 questions tat is 3 question means ,three paargraph.. each para carries 4 question so totally 12 question in critical reasoning.. if u clear all 12 question u will be selected.80% percent sure.then don mug up synonyms from gre barron because they are asking same question from barron but the choice for the questions are changed.. so study synonyms and antonyms from internet.. some pupils have posted the questions.. in tech and h r don use complex word or don show tat u r so dminant.. talk with them how u will speak wit ur friend. u will be through.. don think wat i have posted above is lik some info in other site.. wat i said is true.. they changed apti tis time.. u will be selected if u follow wat i said..again i m saying pls concentrate on critical reasoning.. if all questions in it are right u r through..bye
Measurements of a certain system have shown that the
average process runs for a time T before blocking
on I/O. A process switch requires a time S, which is
effectively wasted (overhead). The CPU’s efficiency is
the fraction of its time its spends executing user
programs, i.e., executing user processes. For round robin
scheduling with quantum Q, give a formula for the CPU
efficiency for each of the following:
(a) Q = ∞
(b) Q > S + T
(c) S hey guys i attended my interview on 29th April in a delhi
zone.They were asking so simple question that i was
surprised. I preapred day and night for the interview
collecting all the question from this link and other site as
well as from GS book but they simply asked
1) tell us about ur family
2) about u
3) Why u want to join banking and not IT .
4) Advantages and disadvantages of computer.
5) Where is hawamahal.
6) about pink city
7) who discovered electron.
8) who invented telephone.
that's all
I think it was just waste of time preparing banking related
questions. 6. NEED OF ONGOING MANAGEMENT CYCLE( Case Study )
Sidney Greenburg was appointed the position of the
director of marketing for a small electronics component
manufacturer. The company had its revenues growing at the
rate of 20% each year and in 1982, they were at 30 million
level The president felt that the growth of the company
required serious planning efforts to determining strategies
product emphasis and new product development.
Mr. Greenburg realising the need to develop the
marketing plan developed a suggested format to obtain
inputs from his regional sales managers. The format to
obtain divided into two parts (a) territory brief for
established status of sales activities and (b) territory
plan asked for identification of key goals, strategy &
resources required to accomplish stated goals. Sales
forecast by products was requested for 3 plan Yrs.
Tom Rosenfield was the marketing manager for Europe
He was previously in the engineering department & was
assigned to Europe because of his technical& Foreign
language capabilities. He replied to Mr.Greenburg as
follows:
“While I will complete the forms on the country brief&
country plan promptly I have some conceptual problems with
them time& time again we have been requested for projected
figures I remember putting together a presentation for the
Executive Vice-President (VP) & Treasurer last year. Great
we educated those guys but what are the results of such
formality? The projections have not yielded specific
results, resources are used at a minimal level & we are not
generating needed sales.
So it is my contention that while goals projections&
forecasts provide immeasurable guidance for a company with
stable sales & developed product lines, for us a fledglings
(young) industry, they distract from the job at hand. My
plan has always been to hit the market- as hard I am able &
I believe this should hold true for all other regional
managers. We have large amounts of resources held up in
ineffective’ marketing planning efforts such as these need
to redirect these efforts to self rather than compile data.
We need more people beating the pavement (action) rater
than sitting on their desks developing plans& strategies
(contemplation) Sell, sell, sell. Get the backing as big as
possible. Planning is wasteful. Let us concentrate on
aggressive sales & optimize sales volume at any cost.
A. What has Mr.Greenburg not done to accomplish his
planning tasks?
B. Is Mr.Rosenfield right in making his comments in
response to Mr. Greenburg’s request?
C. Is Mr. Rosenfleld performing his management
function.
D. What would you do if you were Mr.Rosenfleld’s boss?
What is the life of anaerobic Digester if it is used for
municipal solid waste digetion. I want measure the volumetric flow of gas in waste heat
recovery Boiler?Tell me how and which type of instruments
required.
Plz mail me:naba02222@gmail.com
Sam please post the answer . i wasted one year for the job after completed my btech what
can i say about 1year time in interview Respected Sir/Mam,
I'm very sorry to draw your kind attention
towards me,but I really want you to help me guide me.I read
your article Job Interview in Hindustan times and I'm very
impressed with the article and want u to help me clear my
queries,i know you're very understandable and experienced
and will do your best to help me.
Actually i'm medical student and i did my 12th
with medical stream and during 12th i fell very ill and i
missed my all the terminals and my condition started getting
worst everyday,i never missed even my single test ever but
now first time i missed exam even my parents got serious and
we started my treatment but was of no use and i wasted my
whole year.i missed my tutions etc.my problem was i use to
feel excessive sleepy even after having full sleep at night
i used to start feeling sleepy in morning,as u know we have
to study much in medical stream i was not able to
concentrate on studies bcoz of my problem,i go to school i
keep feeling sleepy then same on tutions and when i used to
sat at home for studies same used to happen.then started my
treatment from some hospital for hyper- somnia but of no use
but in addition i got side affected by a medicine - Severe
head ache.in my entire life my head never ached.but now i
got that problem too.it was not normal head ache but the
severe head ache .like u can say 100% no pain killer use to
cure that pain,during my terminals my fellows use to give
exam and i use to shout in pain at home.then we started our
treatment from P.G.I .i know for them problem was not
serious just sleep sleep sleep.i know who don't like sleep
but it was bothering my studies somehow i sat in final
examinations of 12th and i still remembered that i used to
shout in pain and i even got fungus infection into my ear
and whole day i used to sleep and think i will study at
night or at night used to think in morning exam holidays
used to went like this and i decided to miss this year but
mom really helped me a lot she used to read my whole
syllabus whole whole night and i just use to listen and
somehow i cleared 12th with 80.6% by god's grace.then as i
was so ill nothing was working on i decided to drop next
year to prepare for pmt bcoz since 4th standard i wanted to
become a doctor that's why i took medical bcoz when i was in
4th and my mom was got very ill and she remained ill for
complete 4years and 4 years me and my family suffered a lot
and then when she lost all hopes to recover she was admitted
to P.G.I and got well.and i decided i just don't want others
to suffer from what my mom did .so i decided to be a
doctor.so i dropped as i didn't want to do anything else
then M.B.B.S but there was no improvement in my sleep
problem but i decided whatever may happen i will not stop
studies my parents used to convince me that once i will be
well i can start my studies again
but i always believed that we should learn to work in storms
one day when they will pass and we even will not be able to
know.
so i brought cd's for pmt preparation and i did my 100% as
much as i could in preparing even in problems but whole year
passed i did my best and was doing my best,even in
100%acheness i use to keep keep keep studying sometimes till
4 o clock in morning.and never told my doctor that i m
studying when he told me not to study more than one hour but
u can tell can anybody clear PMT studying one hour and is it
very small syllabus?
and i was so sure that its god only who is making me
study and i will surely clear this year and side by side my
treatment also keep going.whole year passed out my entrance
was in june and may came.i was so tensed that nothing is
working t my sleep problem but i was living with hope that i
will clear entrance but this month i got more ill and my
problem which started from 12th is not solved even not at
this stage after 2years my mom also got ill she got very
depressed and now i just stopped studying bcoz i had to look
after home and mom and everything and i left everything on
god and if he want me to clear entrance i will otherwise
not.i gave
entrance and in exam i was not even able to sit i was
feeling so so so sleepy i was not able to read a single
question to solve them was so far.my head started aching and
i just marked answers without studying and on 10june i got
my result and i didn't get seat and i got very hopeless that
nothing is working on in my life,doctors are not solving my
problem and even on dropping this year and studying i didn't
get seat which was my purpose of life to be a doctor and
smile and serve.but i m very positive type of girl ,i trust
in god and made myself convince that whatever is going on is
going on according to god and how can he do anything
wrong.so i decided to shift my stream and join hotel
management.
but when i found that there is also entrance for that
even. National council for hotel management.
and by the time i became aware of it the entrance was
already held in march April and i missed and it means now
again this year i have to drop to wait for the entrance and
prepare and i just can't join any college bcoz of not being
well now also hmm.
now my question to u is when i will go to give interview
for admissions in college for management next year.what to
say if interviewer will ask why you dropped two years?
i just can't say bcoz i was ill u know i just don't wanna
show my weakness to them otherwise i will miss everyone want
active and smart people not ill right even if i will say
somewhere or other they will feel that i won't be able to
give my 100%.i know u can well understand why right?
but
then what to say to interviewer?
bcoz hotel industry is such a stream where they just want
active smart people who can handle and maintain everything
so perfectly and maintain their reputation.they are also
right at their place but i just don't wanna stop in my life
i also have dreams to fly high.i just don't wanna loose
my chance for 2year drop matter
i know you will surely tell a fabulous answer which will
even make them silent.Give me direct answer to following
answers from which are from interviewer point of view:
why you dropped two years why such a gap in studies?
why u drop ist year?
{i can't say i was ill i know u will tell me good one}
why u drop then another year again?
{if i will say bcoz entrance was already held for this year
thats why i have to wait for another year,what if they will
ask me then what u did whole year?i can't say that i spent
whole year preparing for ur entrance bcoz they will say why
u didn't do on the very ist year when u was in 12th?
what if they will say u took whole year for just preparation
of entrance our students can prepare in month or two months
and clear?
i can't say i m not that intelligent.
reality is even i could prepare in months or two months if i
was normal as i was in 11
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaa
lots of questions aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
help me
i know u will surely gonna help me
eagerly waiting for urs mind blowing answers and very
very thanks for spending ur precious time of fabulous life
in solving out my stupid query.
Your's sincerely,
Srishty I qualified the written exam conducted by BARC and attended
the interview.
First let me tell you that this is the most genuine and
toughest interview among all the PSUs. This is the best
interview methodology that they adopt.
They just ask for very basic questions of Intermediate
(12th) level and want to check the basic understanding.
Almost all the questions are practical questions no direct
relation with the knowledge of core technical. In this way
they look for the way you approach to solve a problem.
Because the post they offer you is scientific officers’
post. This is a research oriented job that requires the
great skills and knowledge to solve a real practical
problem. So, this was a basic idea about the interview. Now
let's talk about the methodology, actually they ask you 4-5
subjects in which
you are more comfortable and ask the basic questions. But
keep in mind that you are really comfortable with those
subjects and you should be thoroughly prepared. Because they
will try to divert you from your answer and will drill on
topic till you surrender. But anyway you don't worry
even if you are not able to solve a problem for whole but
the way you approach and the basic concepts should be
correct. They are generally the minimum time
for interview is more than 45 minutes. Even the person they
know will not be qualified; they drill him at least for 45
minutes. As the interview timing cross more than 45-60
minutes, your chance goes on increasing to get selected.
Finally If they are satisfied with your performance then
they give you a medical slip that insures your eligibility
fir the interview. Final Result depends on the no. of posts
and the merit list prepared on the basis of marks you
achieved in written and interview. I wish you all the best
for your interview.
It is well known that hard work and the luck both are that
major factor that plays important roles in every exam. Your
Luck also plays an important role that by which panel you
are going to be interviewed. During my interview I was a
victim of bad luck so I could not qualified the interview.
I had heard that the panel members being very helpful they
bring you out of the pressure if you feel during the
interview but this was not true in my case.
Anyways, I entered in the room, there were 5 members. The
committee chairman asked me about my hometown. The whole
conversation was in Hindi, so the people who are from Hindi
background they don't need to be afraid of this problem in
PSU interviews.
Then he asked me "Is it your first interview or you
have gone through any other interview?", Me: "Sir this is my
first interview". This normal conversation is just to make
you feel good and to make
you comfortable.
Chairman: So you have done your B.Tech from IIIT?
Me: Yes Sir.
Suddenly another person interrupted as he was looking at my
cv, he told to the chairman that I got first Prize in solid
modeling Contest. This was a curse for me for that interview.
Chairman: So you got first prize in Modeling?
Me: Yes sir.
Chairman: What is Computer Aided Design?
Me: I told.
Chairman: You have been taught the Finite Element Methods
course?
Me: Yes sir.
Chairman: Can you do the analysis of a cylindrical pressure
vessel?
Me: No sir, actually we just learnt the analysis of one
dimensional objects.
Chairman: But you know the basics of analysis steps?
Me: Yes sir.
Chairman: What will be the first step?
Me: We will take the symmetry and will not require going
through the analysis of whole section.
Chairman: Draw the element of symmetry?
Me: I drawn.
Chairman: Next step?
Me: Boundary conditions and Forces.
Chairman: What will be the boundary conditions, forces etc.....?
I could not give the answers, and the trials were wrong and
I was totally confused. but he rammed me a lot and wasted
almost 10 minutes.
It was a bad impression that lead me through the darkness.
Then he asked me to put the name of subjects I studied in
B.Tech as our curriculum is different from other colleges
curriculum, It has major emphasize on Design. So under
pressure I was not able to recall the subjects. I started to
recall them and listed on the paper but didn't minded to put
them in the order
I prepared. Actually I prepared Material science,
Thermodynamics, Heat Transfer and Micro Metal Forming (for
the fabrication of MEMS devices, a recent topic). So they
just started asking the questions randomly from the subjects
they got in that list. After a sometime chairman asked me
about the subjects I am comfortable. I told and given the
preference to Micro-Metal Forming that was a new topic for
him and he decided to get out of the topic and asked about
the issues when we go through the micro forming. I told that
as we go from macro size to micro, the strength, isotropic
behavior and surface roughness changes and affect a lot.
Then he asked how surface roughness comes into picture?
Me: As material thickness approaches towards micro size,
the no. of grain boundaries becomes fewer and grain
boundaries sizes are in the order of microns so the very
early surface has a lot of deviations that comes in picture.
Then he asked: What is inside the space between two grain
boundaries; Gas or Vacuum?
Me: Sir Vacuum. He Said: You are wrong, go and refer the
books. and in this way he came out of the topic that he was
trying for.
So, I will suggest you not to give any new topic as the
persons taking interview may or may not be comfortable with
that and it may be a curse to you.
In Thermo….. he asked
He: there is a cylinder-piston system that contains a gas, a
weight W is kept on piston what will be the pressure?
Me: Sir W/(g*A)---A: area, g: gravity (It was wrong actually
I was in such a pressure that to calculate the pressure I
was using the formula M/A)
Then another person asked me about "g", why I am using it ?
I confidently said: sir to get the mass from weight
He knew that I am confused so he asked me to derive it's
dimension I derived then he asked me to derive the dimension
of force by area and he asked me to compare, and I found my
mistake. I said sorry and then
He: I am giving it "Q" all the boundaries are insulated so
that no heat goes outside, calculate it's final volume?
Me: I was confused and was asking about a lot of irrelevant
information needed to solve.
He: This is all I told you now calculate the volume...no
other information.
I could not derive it.
Then......Fluid:
He: I am having an wedge shaped vessel (triangular shaped) I
want to know the water level at different places, what will
be the levels of water at different tubes?
Me: Same level in every tube.
He: why?
Me: because of fluids property...pressure at a level is same
at every point So the height raised will compensate for it.
He: ok so, pressure is constant at all the points in same
level but different at different levels?
Me: Yes sir.
He: So if I make two holes at different levels and fit a
tube at outside from the vessel then water will flow?
Me: yes sir.
He: If I place a turbine in between the pipe then will the
electricity produced?
Me: No.
He: why?
Me: because water will flow once only.
He: but pressure difference is continuously acting at two
different levels?
Me: as once water flows and the section gets filled pressure
at the same level in vessel and pipe will be same, So no way
it will flow again.
This was a section where I was somewhat comfortable and
answered correctly.
SOM:
Shear stresses, how shear stress comes ....Is bending stress
and shear stress same and a lot....they make me totally
confused.
Mohr's Circle related questions. That I replied correctly.
As you know that I am from Department of Mechanical
Engineering. I qualified the written exam conducted by BARC
and attended the interview.
First let me tell you that this is the most genuine and
toughest interview among all the PSUs. This is the best
interview methodology that they adopt.
They just ask for very basic questions of Intermediate
(12th) level and want to check the basic understanding.
Almost all the questions are practical questions no direct
relation with the knowledge of core technical. In this way
they look for the way you approach to solve a problem.
Because the post they offer you is scientific officers’
post. This is a research oriented job that requires the
great skills and knowledge to solve a real practical
problem. So, this was a basic idea about the interview. Now
let's talk about the methodology, actually they ask you 4-5
subjects in which
you are more comfortable and ask the basic questions. But
keep in mind that you are really comfortable with those
subjects and you should be thoroughly prepared. Because they
will try to divert you from your answer and will drill on
topic till you surrender. But anyway you don't worry
even if you are not able to solve a problem for whole but
the way you approach and the basic concepts should be
correct. They are generally the minimum time
for interview is more than 45 minutes. Even the person they
know will not be qualified; they drill him at least for 45
minutes. As the interview timing cross more than 45-60
minutes, your chance goes on increasing to get selected.
Finally If they are satisfied with your performance then
they give you a medical slip that insures your eligibility
fir the interview. Final Result depends on the no. of posts
and the merit list prepared on the basis of marks you
achieved in written and interview. I wish you all the best
for your interview.
It is well known that hard work and the luck both are that
major factor that plays important roles in every exam. Your
Luck also plays an important role that by which panel you
are going to be interviewed. During my interview I was a
victim of bad luck so I could not qualified the interview.
I had heard that the panel members being very helpful they
bring you out of the pressure if you feel during the
interview but this was not true in my case.
Anyways, I entered in the room, there were 5 members. The
committee chairman asked me about my hometown. The whole
conversation was in Hindi, so the people who are from Hindi
background they don't need to be afraid of this problem in
PSU interviews.
Then he asked me "Is it your first interview or you
have gone through any other interview?", Me: "Sir this is my
first interview". This normal conversation is just to make
you feel good and to make
you comfortable.
Chairman: So you have done your B.Tech from IIIT?
Me: Yes Sir.
Suddenly another person interrupted as he was looking at my
cv, he told to the chairman that I got first Prize in solid
modeling Contest. This was a curse for me for that interview.
Chairman: So you got first prize in Modeling?
Me: Yes sir.
Chairman: What is Computer Aided Design?
Me: I told.
Chairman: You have been taught the Finite Element Methods
course?
Me: Yes sir.
Chairman: Can you do the analysis of a cylindrical pressure
vessel?
Me: No sir, actually we just learnt the analysis of one
dimensional objects.
Chairman: But you know the basics of analysis steps?
Me: Yes sir.
Chairman: What will be the first step?
Me: We will take the symmetry and will not require going
through the analysis of whole section.
Chairman: Draw the element of symmetry?
Me: I drawn.
Chairman: Next step?
Me: Boundary conditions and Forces.
Chairman: What will be the boundary conditions, forces etc.....?
I could not give the answers, and the trials were wrong and
I was totally confused. but he rammed me a lot and wasted
almost 10 minutes.
It was a bad impression that lead me through the darkness.
Then he asked me to put the name of subjects I studied in
B.Tech as our curriculum is different from other colleges
curriculum, It has major emphasize on Design. So under
pressure I was not able to recall the subjects. I started to
recall them and listed on the paper but didn't minded to put
them in the order
I prepared. Actually I prepared Material science,
Thermodynamics, Heat Transfer and Micro Metal Forming (for
the fabrication of MEMS devices, a recent topic). So they
just started asking the questions randomly from the subjects
they got in that list. After a sometime chairman asked me
about the subjects I am comfortable. I told and given the
preference to Micro-Metal Forming that was a new topic for
him and he decided to get out of the topic and asked about
the issues when we go through the micro forming. I told that
as we go from macro size to micro, the strength, isotropic
behavior and surface roughness changes and affect a lot.
Then he asked how surface roughness comes into picture?
Me: As material thickness approaches towards micro size,
the no. of grain boundaries becomes fewer and grain
boundaries sizes are in the order of microns so the very
early surface has a lot of deviations that comes in picture.
Then he asked: What is inside the space between two grain
boundaries; Gas or Vacuum?
Me: Sir Vacuum. He Said: You are wrong, go and refer the
books. and in this way he came out of the topic that he was
trying for.
So, I will suggest you not to give any new topic as the
persons taking interview may or may not be comfortable with
that and it may be a curse to you.
In Thermo….. he asked
He: there is a cylinder-piston system that contains a gas, a
weight W is kept on piston what will be the pressure?
Me: Sir W/(g*A)---A: area, g: gravity (It was wrong actually
I was in such a pressure that to calculate the pressure I
was using the formula M/A)
Then another person asked me about "g", why I am using it ?
I confidently said: sir to get the mass from weight
He knew that I am confused so he asked me to derive it's
dimension I derived then he asked me to derive the dimension
of force by area and he asked me to compare, and I found my
mistake. I said sorry and then
He: I am giving it "Q" all the boundaries are insulated so
that no heat goes outside, calculate it's final volume?
Me: I was confused and was asking about a lot of irrelevant
information needed to solve.
He: This is all I told you now calculate the volume...no
other information.
I could not derive it.
Then......Fluid:
He: I am having an wedge shaped vessel (triangular shaped) I
want to know the water level at different places, what will
be the levels of water at different tubes?
Me: Same level in every tube.
He: why?
Me: because of fluids property...pressure at a level is same
at every point So the height raised will compensate for it.
He: ok so, pressure is constant at all the points in same
level but different at different levels?
Me: Yes sir.
He: So if I make two holes at different levels and fit a
tube at outside from the vessel then water will flow?
Me: yes sir.
He: If I place a turbine in between the pipe then will the
electricity produced?
Me: No.
He: why?
Me: because water will flow once only.
He: but pressure difference is continuously acting at two
different levels?
Me: as once water flows and the section gets filled pressure
at the same level in vessel and pipe will be same, So no way
it will flow again.
This was a section where I was somewhat comfortable and
answered correctly.
SOM:
Shear stresses, how shear stress comes ....Is bending stress
and shear stress same and a lot....they make me totally
confused.
Mohr's Circle related questions. That I replied correctly.