while conducting an experiment why we connect the armature rheostat in maximum position and field rheostat in minimum position
1 3456in a dc motor we supply current only to the armature conductors,from where is the field winding gets excited then??
3 4839what will happen if the field and armature both are made to rotate in a synchronous machine ?
4 5073if the armature current in a dc generator is ac ( sinusoidal ) why doesnt the sjhape af armature mmf a sinusoidal (ni) ? armature mmf in case of a dc machine is triangular.
1516In synchronous generators field is rotor and armature is stator.Can we take the output at the rotor in case of synchronous generator by the dc excitation on the stator?
2 4377in dc machines in the armature nature of power is ac but why we take rasistance instead of impedance?
1 2909armature winding of dc machine produce alternating emf then it convert in to dc by using commutator.But only we consider armature resistance why don't we consider inductive reactane effect?
16451. What will happen if the armature rheostat is not in maximum position while starting the motor? 2. What will happen if the armature resistance is in minimum position and the eld resistance is in maximum position while starting the motor? 3. How do you reverse the direction of rotation of a DC motor? 4. If the armature connection and the eld connection both are reversed, does the direction of rotation of the motor reverse?
2 6631What are the effects of armature reaction on a DC machine and discuss the various methods to reduce the effect.
1 3204
In DC generator, we use commutator, having no. of segments. Then how it is possible to get a half wave of voltage and current for half rotation of armature?
Assume a DC motor with the following parameters : Motor torque control = 0.0848 Nm/amperes Back EMF control = 0.0848 Volts/(rad/s) Armature resistance = 0.75 Moment of inertia = 0.00001696 kg/m2 With zero frictional load and taking a feed forward gain of 2, determine the motor response for a unit step function. please forwaded the answer to the below mail id thanks in advance Regrads, peer_kaba@yahoo.co.in
A 230V dc shunt wound motor has an armature resistance of 0,15Ω.When operating on no load at 650 rev/min the armature current is 6A . The motor takes a full load current of 85A. Calculate the full load speed if the field flux is (i) maintained constant (ii)reduced by 0,03
What is the differance between 2 dc motors of armature voltage 660 v and 440 v?
if the armature current in a dc generator is ac ( sinusoidal ) why doesnt the sjhape af armature mmf a sinusoidal (ni) ? armature mmf in case of a dc machine is triangular.
Why does the radius of armature is less than the radius of pole shoe?
armature winding of dc machine produce alternating emf then it convert in to dc by using commutator.But only we consider armature resistance why don't we consider inductive reactane effect?
Why does increasing the magnetic flux in the main field of a d.c motor cause the armature current to reduce??
A 50Hz,4-pole,3-phase,star-connected synchronous motor has a synchronous reactance of 12ohmsper phase and negligible armature resistances.the excitation is such as to give an open-circuit voltage of 13.2kilovolt.the motor is connected to 115kilovolt, 50hertz supplying. what maximum load can be the motor torque,line current and power factor?
State how to produce a constant rotating field by application of alternating currents to stator armature of a three-phase squirrel-cage induction motor
ii) A shunt motor supplied at 230V, runs at 900 rpm when the current is 30A. The resistance of the armature is 0.4 ohms. Calculate the resistance required in series with the armature to reduce the speed to 600 rpm, assuming that the armature current is then 20A. [12]
explain the methods of measuring aproblem of armature reactionof DC machine?
In synchronous motor, how the field current is related to armature current..i know its inversely proportional..but concept wise...i was nt clear....pls help me...
armature is that part in which current is induced since in dc motor we supply current to the conductor so why we call it armature?
what is mathed of check the D.C MOTOR 181 KW (ARMATURE AND FIELD) WHAT IS THE MATHED OF CHECK THE THYRISTOR MODULE (HIGH CURRENT)