why there is curve at the end in channel sectin
Answer Posted / jai kumar
to minimise the generation of eddy current.
Is This Answer Correct ? | 8 Yes | 0 No |
Post New Answer View All Answers
Kindly post me previous year interview questions with answer for post of DY. Manager (civil engg.) for GAIL, NTPC, IOC, OIL and ONGC etc.
Define graphics window?
3. A vane 12.5 cm long, 8.8 cm dia was pressed into a soft clay at the bottom of borehole. Torque was applied and the value at failure was 55 N-m. find the shear strength of the clay on a horizontal plane.
In the roof of a pumping station explain briefly the components of a waterproofing system?
step by step procedure to find out the percentage of steel in coloum,beam,slab,footing in detailed
How do you compute the volume of airflow?
What is change order request?
on what basis the partial factor of safety are decided? form the load combinations
manhole chamber having height of 2300 mm and thickness of brickwork is 230 mm and dia of opening covering is 560 mm and bottom length vertical is 1500 mm (1:4) brick masonry and plaster 12 mm on both sides..how to estimate the no bricks used with mortar cement bags and sand for total chamber including plaster.
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
How many lbs are there in a yard?
If we are providing concrete joint in every 10m with water stopper in water tank wall then is it necessary to cut the steel at joint section?
Can we weld hot rolled steel ASTM A615 ? Please Give the detail answer please thanks alot
column at edge of a framed structure is uniaxial or biaxial. and is an interior column is biaxial
What is the strength of cement?