why peak purity not considered in GC?
- 4 Answers
- 16424 Views
- DRL, Reddy Labs, Vimta Labs, I also Faced
- E-Mail Answers
Answer Posted / korada_123suresh
In GC we are used FID and TCD detectors, But in HPLC PDA
detector used it shows peak purity
| Is This Answer Correct ? | 23 Yes | 4 No |
Post New Answer View All Answers
if rsd failed then what require to do?
In which situation we require to analytical method validation of excipient?
If change in specification which parameter require to do for validation? if change in chromtographic condition then which parameter? if api change then which parameter? if change composition then which parameter? if old method not work out then whicj parameter? if additional one impurity added then which parameter of validation require to do on above each conditions? elaborate separately
why we are using hexane in calibration of number of drop per mL
How we can identify process related and degradation impurity in single method with short period?
WHY pKa value is more important than pH value of the mobile phase in HPLC?
In IR spectra, generally a molecule vibrates without apply emr or ir light?
How do we fix the sample concentaryion in hplc method development. What is the basis?
How much is the standard area for glc analysis
Why only hydroxy naphthol blue indicator is used for standardisation of 0.05M EDTA solution instead of solochrome Black T or Euriochrome Black T indicator which is used for all sample analysis with 0.05M EDTA solution?
How to start the dissolution development for unknown tab?
what is difference in ods I ods II is this is realy from sorbent / packing characteristics or from other means
I have compare C2H2-air and C2H2-N2O flame AAS on determination calcium. Both use same range of std to plot calibration curve. (2-6ppm) When i measure the sample with phosphate, KCl and LaCl, C2H2-N2O flame give false positive result, around 0.5ppm. When i measure the sample with phosphste, KCl and EDTA. C2H2-N2O flame also give 0.5ppm false positive. But both above mentioned sample would not give false positive when measured by C2H2-air flame. What is the reason?
What is the accrptance criteria in RSD for RS method precision on basis of impurity percentages?
What is the requirement for brazil in the analytical method vslidation comparr to ich?
