Interested to Buy Any Domain ? << Click Here >> for more details...
Topic :: Tin
What are the 3 ways routers learn paths to destination networks? A.) Dynamic B.) Static C.) Routing tables D.) Default
1 6359The benefits to segmenting with Bridges are which of the following? A.) Scalability B.) Datagram filtering C.) Manageability D.) Reliability
1 4361Most routing protocols recognize that it is never useful to send information about a route back out the direction from which the original packet came. This is an example of which routing technology? A.) Split Horizon B.) LMI C.) Triggered Updates D.) Poison Reverse E.) SYN, ACK F.) DLCI
1 4535Station A is transmitting data to station B, and expects an acknowledgment after every 400 bytes. After transmitting data for a while, the two stations determine the line is reliable and change to expecting and acknowledgement every 600 bytes. This is an example of (pick the best answer only): A.) BECN B.) Sliding Windows C.) Poison Reverse D.) Countdown timers E.) Split Horizon F.) Count to infinity
1 4025When a Distance Vector routing protocol detects that a connected network has gone down, it sends out a special routing update packet, telling all directly connected routers that the distance to the dead network is infinity. This is an example of which routing technology? A.) ICMP. B.) Only Link State routing protocols have this intelligence. C.) Triggered updates. D.) Garrison-4. E.) Split Horizon. F.) Poison Reverse.
1 5080What is the command to start IP RIP version 1 routing on a Cisco router? A. show rip B. enable rip C. router enable D. router rip
6 9985With one method for transmitting frames through a switch, the switch receives the complete frame and checks the frame CRC before forwarding the frame. What is the switch transmission method called? A. CSMA/CD B. Full Duplex C. Cut-Through D. Half-Duplex E. Fragmentation F. Store and Forward
2 5122What are the two primary operating modes for frame switching? A. Full Duplex B. Half-Duplex C. CSMA/CD D. Cut-through E. Fragmentation F. Store and Forward G. User mode H. Privileged mode
1 5049What is the result of segmenting a network with a router into segments 1 and 2? A. It increases the number of collisions B. It decreases the number of broadcast domains C. It connects segment 1 and broadcasts to segment 2 D. It connects segment 1 and broadcasts from genre to segment 2
2 9012Which commands should you use to enable IGRP routing? A. router igrp 100 Network 192.168.1.0 Network 10.0.0.0 B. router igrp 100 Network 192.168.2.0 Network 10.0.0.0 C. router igrp 100 Network 192.168.1.0 192 168.1.1 Network 10.2.0.0 10.2.1.1 D. router igrp 100 Network 192.168.1.0 255.255.255.0 Network 10.2.0.0 255.255.255.0
3 7731On a network design project you determine that a new testing application requires multiple hosts. These hosts must be capable of sharing data between each host and an enterprise server at 10 Mobs bandwidth. Other divisions in the company use applications that require less than 2 Mobs bandwidth of the enterprise server. What is your most economical recommendation? A. That existing 10BaseT hubs be replaced with 1 00BaseT hubs to improve overall performance B. That a router can separate the testing application from the rest of the network, thus allowing the testing application more bandwidth. C. That a switch be installed, so that the enterprise server can be provided a 100 Mobs pod and each of the testing application hosts can be given dedicated 10 Mobs pods] D. That a bridge be placed between the enterprise server and all other users with the exception of the testing application
1 4334What are two purposes for segmenting a network with a bridge? (Choose two) A. to reduce collisions B. to increase collisions C. to add collision domains D. to reduce collision domains E. to have more broadcast domains
3 19232Assuming no subnetting, which two pieces of information can be derived from the IP address 144.132.25.10? (Choose two) A. It is a Class C address B. It is a Class B address C. The network address is 144.0.0.0 D. The network address is 144.132.25.0 E. The host spoon of the address is 25.10
2 8414Which command sets IGRP as the routing protocol for autonomous system 100? A. Router(config)#igrp 100 B. Router(config)#network 100 C. Router(config)#router igrp 100 D. Router(config)#enable igrp 100
1 8140Which two steps are part of the process of creating Frame Relay subinterfaces on a point to point connection? (Choose two) A. configure the router to forward all broadcast packets B. remove any network address assigned to the physical interface C. configure the local data link connection identifier (DICI) for the subinterfaces D. cartoon the total committed information rate (CIP) available among the subinterfaces
1 4156
- Testing
- Manual Testing
- Automation Testing
- Black Box Testing
- White Box Testing
- Unit Testing
- Incremental Integration Testing
- Integration Testing
- Functional Testing
- System Testing
- End to End Testing
- Sanity Testing
- Regression Testing
- Acceptance Testing
- Stress Testing
- Performance Testing
- Usability Testing
- Install Uninstall Testing
- Recovery Testing
- Security Testing
- Compatibility Testing
- Exploratory Testing
- Ad hoc Testing
- User Acceptance Testing
- Comparison Testing
can i get apex technologies interview questions in testing
This job requires periods of heavy lifting for most of the day. Are you able to do this?
code to sorting an array of objects
Are you involved in writing the inferential analysis plan? Tables specifications?
hai im finished software testing course im technicaly strong but yet now no opportunities come to me.if any opportunities please send to my mail id my mail di is sumathi11685@gmail.com
What are the cases why parameterization is necessary when load testing the Web server and the database server?
HI ALL ,IAM NEW TO THIS FORUM,COULD ANYONE PLZ FOWAED INTERVIEW QUESTIONS/FAQs ON BASE CUST ,CIC AND MARKETING TO MY E-MAIL ID RAO317@GMAIL.COM.......Shiva THANKS
Hi Everybody, I just have joined this Forum with a hope to get help from you all.Recently I have finished SAP CRM training and presently looking for jobs. Any help from you guyzs will be greatly appreciated. To start with, if I can get INTERVIEW QUESTIONS & ANSWERS mail me at s12421@yahoo.com. If Qs & As are on Base customization, Marketing, Middleware & CIC, it would be more helpful for me. Thank You all. Shiva(Rushi)
Technical Ability Test: This was difficult. three questions to be attempted in 60 min. The Coplete Technical Paper was as follows: Write the Pseudo code for the following: 1. Wrie a function which returns the most frequent number in a list of integers. Handle the case of more than one number which meets this criterion. public static int[] GetFrequency(int[] list) 2. Counting in Lojban, an artificial language developed over the last fourty years, is easier than in most languages The numbers from zero to nine are: 0 no 1 pa 2 re 3 ci 4 vo 5 mk 6 xa 7 ze 8 bi 9 so Larger numbers are created by gluing the digit togather. For Examle 123 is pareci Write a program that reads in a lojban string(representing a no less than or equal to 1,000,000) and output it in numbers. 3. Where now stands that small knot of villages known as the Endians, a mighty forest once stood. Indeed, legand has it that you could have stoodon the edge of the wood and seen it stretch out for miles, were it not for the trees getting in the way. In one section of the forest, the trees stood in a row and were of hight from 1 to n, each hight occurring once and once only. A tree was only visible if there were no higher trees before it in the row. For example, if the heights were 324165, the only visible trees would have been those of height 3,4 & 6. Write a Program that takes an array of integers representing the heights of the trees in the row as input and prints the list of the visible trees. //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// ////////////////// Ques1: Given an array containing k nos in the range 1..n and another scratch array of size n. Write an program to remove the duplicates from the array. Ques2: Given a table of the form: Product Sold on A 1/1/1980 B 1/1/1980 C 1/1/1980 A 1/1/1980 B 1/1/1980 C 2/1/1980 A 2/1/1980 There are 30 products and 10,000 records of such type. Also the month period during which sales happened is given to u. Write the program to display the result as: Product Month No. of copies A January 12 A February 15 A March 27 B January 54 B February 15 B March 10 C January 37 Ques3: Definition of priority queue was given. We have to implement the priority queue using array of pointers with the priorities given in the range 1..n. The array could be accessed using the variable top. The list corresponding to the array elements contains the items having the priority as the array index. Adding an item would require changing the value of top if it has higher priority than top. Extracting an item would require deleting the first element from the corresponding queue. The following class was given: Ques4: An array of size 5X5 is given to us. The elements from 1 to 25 are to be inserted in the array, such that starting from a particular position for an element i, the next element i+1can be inserted only at the mentioned positions (u,v), and if these all positions are occupied then it returns giving a count of how many positions have been occupied in the array: //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// ////////////////// Example: if the starting element is 1 with the given positions (1,2), then next element 2 can be placed at any one of the positions marked with *. _ _ _ _ _ 1 _ _ _ * _ _ _ _ _ _ _ * _ _ * _ _ _ _ 2. Four questions of programming in c++, questions were:( 1:30 hr) a) Bubble sort through recursion b) Display Pattern: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 … c) Perform the functionality of 2-D array through 1-D array and in it the functions to be performed were: (1) Display the array in 2-D format (2) Display a particular element (3) Display a particular row (4) Display a particular column d) Give an efficient program for string matching like: Text: this is the code in the text which you have to search by code Pattern: Code Count the no. of occurrences of the pattern to be searched //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////// ////////////////// a) suppose u r given a 4*3 rectangle like (take these values from user) Now u have to calculate the no. of squares in this rectangle like: No. of squares of dimension 1 is 12 No. of squares of dimension 2 is 6 No. of squares of dimension 3 is 2 No. of squares of dimension 4 is 0 Total no. of squares are 20. b) Suppose u r given a string. U have to find the occurance of the characters A-Z in that string. Each character must appear in the string and must appear only once. If It that occurs in string more than one time return 1 showing it is a perfect string otherwise return 0 showing it is not a perfect string. c) Suppose u r given 10000 marks. U have to pick up top 20 top marks from them and display it on the screen. (Use the optimal sorting algorithm) d) Suppose u have a chess board. U have to insert 8 queens on the chessboard in the style that the queens don’t intersect in the diagonals, columns and rows. If they intersect return 1 else return 0.(that is no more than one queen should be present either in row or column or diagonals.) If the queen is inserted at a position in the chessboard, its count is 1.
Hi, i am looking job in perfomance testing using Loadrunner can any body help me a project in any domine plz(Usah) chs_29@rediffmail.com
i am looking job in perfomance testing using Loadrunner any one help me a project plz......?(Chandana) chs_29@rediffmail.com
Hi Dear this urgent for me i have need of ROLTA India Ltd Mumbai Paper pattern for Testing Person , PLease Help me , if any body have any idea about it
in user parameter property we have list of values.can we write select query for binding? for example:: select empno from emp where deptno=:deptnum :deptnum is first parameter it displays distinct dept nos. if i do like this it is giving error:: bind variables are not allowed in the select statement
What is the difference between GUI Testing,UI testing and Usability TEsting
Where we have to use perl scripting in Testing approach and its importance
