why we are using -24 vdc in plc?
For sinking connection we are usinf -24vdc in plc
Is This Answer Correct ? | 3 Yes | 0 No |
If a control valve is hunting means means if we are giving 50% to the cv, the cv will open at 51% then slowly slwoly it will reaches 49% , so what to do for solve this problem. The cv is double acting and mounted for anti surge operation, it having 4 nos. volume booster, one sov, one positioner, etc..?
How earthing can be checked????
Hot calibrate a level transmitter (wet & dry legs)?
What is the use of each wire in three wire RTD
how 3 out of 2 Logic/interlocks works? give brief explanation with help of diagram.
In Safe Guarding test what means by "Failed to Danger" ?
why use 4-20mA in the field of instrumentation?
what is Best Among SINK Or SOURCE Type Design In Digital Signal, Either Iput Or Output? WHY?Can any one..
can you tell me how many stages in steam turbine of 10 MW power plant
draw shematic diagram of c/v positioner(smart type)?
In a ball valve which require 24v dc supply to operate, whose solenoid valve doesn't have any + or - indication, how can we make wiring connectionto solenoid valve?
1 Answers Process Control Technologies,
I work on a electronic positioner transmitter 4211 at the field.I connect my multimeter in series to get the current output then I calibrate it to 4ma in 0% of position of the valve and 20ma in 100% position of the valve.My problem is in the field I get the correct output current based on my multimeter but in the dcs they only receive 40% in a output 20ma of this positioner.Then I try to simulate in this analog card and they receive the equivalent percent on the value that I simulated.Is ther any possibility to reset the zero and span of this positioner 4211 fisher.And what other possibility I can do to fixed this.This is my email add ( landicho_randy@yahoo.com )