we have provided 30 mA rccb to water cooler.but we feel shock in cooler body.what is the reason?
Answers were Sorted based on User's Feedback
Answer / siddu r
earthing problem.
so we connect earthing for body
Is This Answer Correct ? | 1 Yes | 0 No |
There will be some problem in connection of rccb because rccb is trip when you got shock from any apperatus
Is This Answer Correct ? | 1 Yes | 0 No |
Minimum magnitude of current to feel shock is just 1mA(in case of AC).
when you are not earthing equipment properly you will get shock.
Is This Answer Correct ? | 0 Yes | 0 No |
There are different classes of protections in power plants.class a,b,c are clear..is there any class d and e r there..and elaborate class b protection.
why there is no short circuit when any resistance is used between phase and neutral?
i want prepare power grid exam what are book we want refer for electrical ?
Can anybody tell me how to calculate(formula) earth flat size(for copper and aluminium).
Simultaneous trip of incoming and outgoing breakers of 400kv/220kv trnasformer. What are the probable causes?
What is the difference between circuit breaker and isolator
During a temperature rise test of a bus duct, it is fed with 415 volts at 2000 amperes. Why dont we get an electric shock if we touch the bus bars?
why the rating of a transformer in kva not in kw.
HT and LT cables can be laid on same cable tray
we have 400kv/6.6kv transformer ,it has total 9 taps on HV side with normal tap on tap no 5.when we took the ratio test we observed that ratio was decreasing from tap 1 to tap 5 and was found increasing from tap 5 to tap 9.What is the reason?if anyone have related document then please send me on the email id ankushbahale@gmail.com......plz plz
why does in transformer the v/f ratio constant?
In a synchronous motor. if start is running at high speed. What will be the starting torque : Higher Lower Zero