how much cement and sand is used for plastering 1646 sq
feet,for 12mm thickness and ratio 1:4
Answers were Sorted based on User's Feedback
for 12mm plastering, first convert 1646 sq.ft into sq.mt ie
= 1646/10.76 sq.m, = 152.97 or say 153 sq.m!!
now convert that into cu.m by multiplying with thickness of
plastering i.e =153*12/1000, = 1.836 cu.m!!
wet mixed mortar for uniform layer = 1.836 cum, adding 30%
for filling up joints, uneven surfaces.. =
1.836+1.836*(0.25) =2.295 increasing again by 25% the dry
volume = 2.295*1.25 = 2.869 cum, the mix proportion for
plastering is 1:4 i.e cement =1/5*2.869 =.574 cum,
=.574*1440(density of cement) = 826 kgs, similarly sand =
4/5*2.869 =2.296 cum,
= 2.296*1840(density of river sand)= 4224.6 kg's
Thank you, all the best!
Is This Answer Correct ? | 16 Yes | 0 No |
Answer / sjtbehera
let it be convected in to sqm i.e. 1646/10.8= 152.40sqm
per 100 sqm - cement -12 bags and sand 1.62 cum required
please calculate according to that
Is This Answer Correct ? | 4 Yes | 4 No |
Rate of plasting per sq.ft...?
Please let me know the simplest way of Calculating mix designs for any grade.
Before casting a basement roof slab which is connected with retaining wall surcharge load (i.e. sand or earth filling) outside the retaining wall is prohibited because of––
What is the difference between absorption & adsorption and sorption?
FOR concrete structure curing is important for hydration process,curing component is good for the concrete if W/C ratio is more than .38
one cricket ball through in chennai and jaipur same speed where bowl has fast speed
the bubble tube parallel to the telescope of theodolite should be more sensitive since it controls a. vertical axis b. horizontal axis c. axis of bubble tube d. none of this
sir tell me the formula for calculating the volume of 380mm dia double under reamed pile of 4.0 mts depth.
what is steel consumption for high rise building column, beam, slab,footing
what grade of concrete to be used for lintel when reinforced with bamboo in place of steel?????????
per 1 cumt concrete how much manhours is required including shuttring,steel etc.,for slab & foundations
what is difference in chemical composition between fe415 and fe500