What are four ways that Fast Ethernet compares to 10BaseT
Ethernet? (Choose four)
A. Fast Ethernet uses the same Maximum Transmission Unit (MTU)
B. Fast Ethernet is based on an extension to the IEEE 802.3
specification
C. Fast Ethernet uses the same Media Access Control (MAC)
mechanisms
D. Fast Ethernet preserves the frame format that is used by
10BaseT Ethernet
E. Fast Ethernet errors a speed increase one hundred times
that of the 10BaseT Ethernet
What is a back off on an 802.3 networks?
A. It is latency in store and forward switching
B. It is the time used for token passing from machine to machine
C. It is the retransmission delay that is enforced when a
collision occurs
D. It is the result of two nodes transmitting at the same
time. The frames from each transmitting device collide and
are damaged
What does the command show access-lists 101 list?
A. all defended access lists
B. all access lists within the router
C. the contents of standard access list 101
D. the contents of defended access list 101
Which two steps are required to confound and apply standard
access lists on an interface? (Choose two)
A. define an access list number and its parameters
B. enable an interface to become part of the access list group
C. define the number of access lists to be supported on an
interface
D. copy the access list definition to each interface that
will support it
Given the configuration example<HR>
<B>interface ethernet0
ipx network 4a
ipx access group 800 out
interface ethernet1
ipx network 3d
interface ethernet2
ipx network 5c
access list 800 permit 3d 4a</B><HR>
Which two actions result from implementing this
configuration? (Choose two)
A. IPX network 5c will not receive any traffic
B. Traffic from network 3d for network 4a will be forwarded
out e0
C. Traffic from network 4a for network 3d will be forwarded
out e0
D. Traffic from network 3d destined for network 4a will be
forwarded out e2
E. The access list is applied to an outgoing interface and
filters outbound traffic
Which configuration task must you complete if a remote Frame
Relay router does NOT support Inverse APP?
A.configure static maps
B.define an IP address locally
C.disable DHCP on the Frame Relay router
D.configure a static route to the remote network
What are three benefits of Integrated Services Digital
Network (ISDN) (Choose three)
A. PVCs are faster and more reliable
B. No specialized equipment is required
C. Data transfer is faster than typical modems
D. Call setup is faster than with standard telephone service
E. It carries many types of data tramp such as voice video
and data
Company XYZ has an employee that works out of the home. The
employee runs big client server applications and must
quickly transfer large files. The company wants the best
cost/benefit on this connection. What would be the most
practical solution?
A. an ISDN Basic Rate Interface (BRI) connection to the user
at home
B. a dedicated T1 connection to the user at home
C. a dedicated Frame Relay connection to the user at home
D. a standard 28.8 analog dialup connection to the user at home
Which encapsulation methods are most commonly used with
dialup Integrated Services Digital Network (ISDN)?
A. IP and IPX
B. IP and PPP
C. PPP and SDLC
D. PPP and HDLC
Which statement about the Committed Information Rate (CIP)
is true?
A. It is the rate in bits per second at which the Frame
Relay switch agrees to transfer data
B. It is the clock speed (pod speed) of the connection
(local loop) to the Frame Relay cloud
C. It is the maximum number of bits that switch can
transferduring any Committed Rate Measurement Interval
D. It is a signaling standard between the 3PE device and FP
switch. It is responsible for managing the connection and
maintaining status between the devices.
Your network is having IP problems connecting to one or more
Frame Relay peer routers. Which two commmands should you
use to show the routers that are reachable? (Choose two)
A. show ip map
B. show ip router
C. show frame-relay map
D. debug frame-relay map
Which two steps are part of the process of creating Frame
Relay subinterfaces on a point to point connection? (Choose
two)
A. configure the router to forward all broadcast packets
B. remove any network address assigned to the physical interface
C. configure the local data link connection identifier
(DICI) for the subinterfaces
D. cartoon the total committed information rate (CIP)
available among the subinterfaces
Which statement about the flow control function of TCP is true?
A. TCP makes no snarl to check for lost or duplicate data
packets
B. The application layer must sequence data packets when
using TCP
C. TCP controls the flow of UDP data through negative
acknowledgements (NAK)
D. TCP is a connection oriented protocol that acknowledges
receipt of data packets and is considered reliable
Which command sets IGRP as the routing protocol for
autonomous system 100?
A. Router(config)#igrp 100
B. Router(config)#network 100
C. Router(config)#router igrp 100
D. Router(config)#enable igrp 100
Hi Friends i have plan to do certifcation in mercury
Automation Tool QTP.But I Didnt get any clear details
regarding course syllabus,fees and where to approach so can
any one send me the details
183
I have my NCFM certification-beginner's level exam at 20th
of feb.
if anybody has any dump/test paper except those, present is
nse-india site please send it to me at
rashi_khushi@rediffmail.com
thanks in advance
724
hi i wud like to go for a+ hardware exam so what r d exam
details can u give me briefly
What is needed to ensure a check field is verified against
the referenced key field of the check table?
a) same data element is required for check field and
referenced field
b) same domain is required for check field and referenced field
c) same data type only is required for check field and
referenced field
d) all key fields MUST have domain equality between check
table and foreign key table
Note: I am confused between A or C ? Please answer only if
you are very sure. Else pls ignore.
Hi,
If anyone has the Informatica power center 7 dump available
for advance mapping design then please post it on
the following id:
garvitas@gmail.com
302
i am 18 years old and have located a college in usa which
is favourable for me.i wanna ask that do i need to give a
toefl test if i am going usa for language studies and one
more thing, do i have to get toefl scores from some
international institute or i can also get scores from my
countrie's local institute which provide toefl
tests.plzzzzzzzzz help me solve this confusion
32
Murali Raju
I would also be intrested in persuing qtp certification
could you send me the tutorial . My email is
nikhilaram@gmailcom. Can you also let me know where i can
get the certification details like fees and the center
information.
Thanks
Nikhila.
i am planning to give cognos cerification exam can u
please help me question guide
175
Hi I want to do certification on security trading.Any idea ?
90
Hi Jitendera, Wat do u do..?? I mean r u working
anywhere???? Basically where r u from??? If u don't hv any
problem, u can say..?? Or else mail me mr.shahin07@gmail.com
89
please give us the detail about the company HESS
CORPORATION , 1-11 Jhon street London
168
Hai friends......I want to do ISTQB certification.Am in Navi Mumbai and i want to know abt the study centre and the course details for ISTQB in Navi Mumbai.Pls mail me as soon as possible
5
What is deferent between Windows 2003 server and Windows
server2008
tell the function of Source record of DNS server. why we
create Stub zone? Tell Round Robing also?
209
HI, I have completed my M.com and MBA and currently working
in IT sector in HR Recruitment. i just want to do Oracle
HRMS functional course. And is there is any study center in
Coimbatore from where i can do this certification.
12
Can any one please suggest me about certification in
Mainframe.I have two year experience in Mainframe though i
want to purse standard mainframe certification like Oracle
certification...
Ask Questions on ANYTHING, that arise in your Daily Life at 
Site Map
